Programming steps:

Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked. Have all the remotes near you that you want programmed.

Insert the KEY into the ignition (Do NOT Turn), then Pull key out, and repeat.

KEY: IN, OUT, IN, OUT

Driver's door: CLOSE, OPEN, CLOSE, OPEN

KEY: IN, OUT

Driver's door: CLOSE, OPEN, CLOSE, OPEN, CLOSE!

Key: IN!

TURN key to ON (Don't start), then back to OFF

KEY: OUT!

Ready to program new remote (door locks will lock and unlock to acknowledge programming mode)

1) Within 40 seconds, Press the LOCK and UNLOCK buttons on the remote simultaneously for 1.5 seconds.

2) Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds.

Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.

Repeat steps 1 and 2 for each new remote.

When complete, Open drivers door and car will exit programming mode.

Our smart keyless entry remote include Toyota rav4 2006 key, scion xb keys, 2008 toyota rav4 key fob, 2010 rav4 key, Toyota rav4 2007 remote key and so on. Please check your model and year before buying.