JROD 4-way stainless steel nozzle holder with a 0040, 2540, 0015, 2512 or any nozzle in that range for your 4 - 5 GPM pressure washer. 

If you do not prefer the 25-degree spray pattern to rinse low or apply soap, simply state your preference for a different spray pattern in the checkout notes. 

We strongly suggest adding a SN4I or Anodized colored version to this purchase. you can remove any of the nozzles and replace it with the Kyle Davis long range nozzle and gain some serious distance. 

We are happy to exchange a different spray pattern for the same price. These will not arrive installed.  

Please use medium or blue liquid thread lock to prevent cracking the JROD.

Simply quick connect the JROD to your single lance. Insert the plug you wish to use. 

Should you need assistance with choosing the nozzles, call or email us. We are happy to help you save time and money by choosing the correct nozzle for the job. 

These are a best guess for both direct drive and belt driven 4 - 5 GPM 3500-4000 psi pressure washers. You should reach several stories with the 0015 nozzle but not apply soap when your downstream injector is inline. The 0040 will allow you to generously apply soap several stories. The 2512 should allow you to rinse without much pressure or Softwash pressure wash. The 2540 will allow you to apply a generous amount of soap using your downstream injector or use it to rinse by removing your injector. The 2515 is a good nozzle to move sand. Of course, if you still pull chemical and do not want to pull chemical, remove the injector. 

According to the nozzle calculator at 4 GPM, using a 15 orifice will drop your pressure to 284 psi if using 4 GPM and a 40 orifice will drop your pressure to 40 psi. 

 SKU: 6540-4