/eh/2025-01-08/173633966714069467/picture.png)
/eh/2024-12-24/173503345348979036/Favorite-Icon.png){kind=icon}
/eh/2025-07-08/1751962110204480194/picture.png)
/eh/2025-06-21/1750485478958537574/countryInfoIcon.png)
/eh/2025-06-21/1750485741321434291/Hi-Sign-in-My-Nihao.png)
/eh/2025-06-21/1750485837193896318/cart.png)
/eh/2025-06-21/1750485968202533847/cart.png)
/eh/2025-04-17/1744862476612819675/hot-img.png)
/eh/2025-11-07/1762504524550532584/header-icon.jpg){kind=icon}
/eh/2025-07-07/1751875582852206790/header-icon.png){kind=icon}
/eh/2025-07-07/1751875587886277738/header-icon.png){kind=icon}
Best in 7 days
home
>
MoldRite 25 Silicone - Classic Mold Making Silicone
>
MoldRite 25 Silicone - Classic Mold Making Silicone
download picture
description
MoldRite 25 Silicone - Classic Mold Making SiliconeMoldRite 25 silicone is our most popular mold making material in our silicone line. This product is mixed with Cat Blue catalyst providing 40 minute working time. Typical Silicone Applications Figurine and giftware casting using materials such as, but not limited to Polyester, Urethane and Plaster Conventional Prototype tooling Stereolithography, prototype tooling Typical Silicone Catalyzed Properties Mixed at 24C (75F) and 50% R. H. Mix Ratio, A: B
Shopping security
product description
Why choose thelockerguy wholesale?
MoldRite 25 silicone is our most popular mold making material in our silicone line. This product is mixed with Cat-Blue catalyst providing 40-minute working time.
Typical Silicone Applications
- Figurine and giftware casting using materials such as, but not limited to Polyester, Urethane and Plaster
- Conventional Prototype tooling
- Stereolithography, prototype tooling
Typical Silicone Catalyzed Properties
Mixed at 24°C (75°F) and 50% R.H.
| Mix Ratio, A:B (parts by weight) at |
10:1
|
| Viscosity, cP (mPa.s) | 43,000 |
| Work Life, minutes (1) | 40 |
| Pot Life, Hours (2) | 2 |
| Demold Time, hrs at RT | 6 |
| 24 Hour Thick Section Hardness Shore A (3) | 28 |
Typical Properties of Cured SILICONE RUBBER
Cured 7 days at 24° (75°F) and 50% RH
| Color | Blue | |
| Specific Gravity | 1.11 | |
| Hardness (Shore A) | ASTM D2240 | 30 |
| Tensile Strength, psi (/mm2) | ASTMD412 | 630 (4.3) |
| Elongation (%) | ASTM D412 | 430 |
| Tear Resistance, ppi (N/mm) | ASTM D624, Die B | 100 (17.5) |
| Linear Shrinkage (%) (4) | 24 Hours | 0.5 |
| 7 Days | 0.6 | |
| Coverage-cu.in/lb. (cc/kg) | 24.9 (900) | |
| Temperature Range, °C(°F) | -50 to 150 (-58 to 302) | |
Shelf Life : Six (6) months from date of shipment when stored at 24°C (75°F) in original containers.
Mixing Guidelines for MOLDRITE 25 two component RTV Silicone Tin Cure Mold Making Systems
Stir the base (Part A) well before use (except when machine dispensing).
Shake the catalyst container (Part B) well before use.
This is a 10 Part A to 1 Part B mix ratio by weight. Weigh the desired amount of base into a clean mixing container. Tip the container and roll the base all the way around the sidewall up to two inches from the top. This will prevent the catalyst from becoming absorbed into the container. It is recommended that the container be filled to not more than 1/3 the container depth to allow sufficient room for expansion during the deaeration procedure.
Weigh the proper amount of catalyst into the container. Mix the base and catalyst together by stirring with a stiff, flat-ended metal spatula until a uniform color is obtained. Scrape the container walls and bottom well to insure a thorough mix.
Place the container into a vacuum chamber and evacuate the entrapped air from the mixture using a vacuum pump capable of achieving 29 inches of mercury vacuum. The mixture will rise, crest and then collapse in the container. Interruption (bumping) of the vacuum may be necessary to prevent overflowing the container. Keep the mixture under full vacuum for 2-3 minutes after the material has receded in the container.
Bleed air slowly into the vacuum chamber. When the chamber is at atmospheric equilibrium, remove the cover plate and take out the container.
Pour the deaired material slowly in a steady stream from one end of the mold box so that the material flows evenly over the pattern. This should minimize entrapment of air bubbles under the flowing material. A ?print? coat may be poured first over the pattern, which will also help reduce the possibility of entrapping air on the pattern and in the cured rubber. A mold release (petroleum jelly) may be applied on the pattern first to improve release.
Allow the rubber to cure for 16-24 hours at 75+5°F (24°C) before removing the cured rubber mold from the pattern. Heat acceleration is not recommended with this product.
Shake the catalyst container (Part B) well before use.
This is a 10 Part A to 1 Part B mix ratio by weight. Weigh the desired amount of base into a clean mixing container. Tip the container and roll the base all the way around the sidewall up to two inches from the top. This will prevent the catalyst from becoming absorbed into the container. It is recommended that the container be filled to not more than 1/3 the container depth to allow sufficient room for expansion during the deaeration procedure.
Weigh the proper amount of catalyst into the container. Mix the base and catalyst together by stirring with a stiff, flat-ended metal spatula until a uniform color is obtained. Scrape the container walls and bottom well to insure a thorough mix.
Place the container into a vacuum chamber and evacuate the entrapped air from the mixture using a vacuum pump capable of achieving 29 inches of mercury vacuum. The mixture will rise, crest and then collapse in the container. Interruption (bumping) of the vacuum may be necessary to prevent overflowing the container. Keep the mixture under full vacuum for 2-3 minutes after the material has receded in the container.
Bleed air slowly into the vacuum chamber. When the chamber is at atmospheric equilibrium, remove the cover plate and take out the container.
Pour the deaired material slowly in a steady stream from one end of the mold box so that the material flows evenly over the pattern. This should minimize entrapment of air bubbles under the flowing material. A ?print? coat may be poured first over the pattern, which will also help reduce the possibility of entrapping air on the pattern and in the cured rubber. A mold release (petroleum jelly) may be applied on the pattern first to improve release.
Allow the rubber to cure for 16-24 hours at 75+5°F (24°C) before removing the cured rubber mold from the pattern. Heat acceleration is not recommended with this product.
For best results, allow the mold to air cure an additional 24 hours before using it in production. Full cure is achieved in 3-7 days.
Catalyzed Procesing Properties are affected by Temperature and Humidity Variation
For best results, mix and cure the material at 75°F (24°C) and 50% relative humidity. Higher temperature and humidity will decrease the work life and pot life of the material. The faster cure will also affect the flow properties. Refrigeration of the base prior to use in hot environments has shown to improve the handling properties of this material. Lower temperatures and humidity will increase the work life and pot life of the material. The slower cure will increase the flow time. Cure temperatures below 68°F (20°C) are not recommended and have been found to cause a reduction in final cure hardness and properties. It is important that the catalyst containers are tightly closed after use. Catalyst exposed to air for extended periods of time will hydrolyze (cure). An indication of hydolysis is a film or crust formation on the surface of the catalyst. The use of hydrolyzed catalyst is not recommended and may cause incomplete cure.
Safety Precautions
Use Material in Accordance with Material Safety Data Sheet
This rubber system uses an organometalic tin catalyst, which may irritate or burn shin and eyes upon contact. If eye contact occurs, flushing with water for at least fifteen minutes should relieve discomfort. If irritation persists, obtain medical attention.
KEEP PRODUCT AWAY FROM CHILDREN
MoldRite 25 Silicone - Classic Mold Making Silicone
Item no
:
62910865427
US$ 41.95
Pay in 4 interest-free payments of $10.49 Learn more
Min. order:
1piece
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Please add the products
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
Discover Niche Categories That Outsell
Top-Converting Item to Boost Your Average Order
Best in 7 days
Best in 7 days
Best in 7 days
Best in 7 days
recommand products
