Phrozen’s Nylon-Green Tough Resins are stretchable, withstanding high pressures up to 19 MPa, and do not break easily. These resins are specifically made for prototyping and creating functional resin pieces. 

Specifications

• Viscosity: 742 cps
• Density: 1.1 g/cm3
• Tg: 73 °C
• Elongation: 130%
• Break Value: 19 MPa
• Shore Hardness: 68D
• I-Zod Impact: 23.79 KJ/m2
• XY Resolution: 0.047 mm
• Layer Height / Parameter: 10 sec @ 50 um, Delay 3
• To Clean Printed Part: For best results clean with Phrozen Wash: Resin Cleaner. Do not immerse printed part into alcohol over 30 sec.
• Compatible Printer: Phrozen 3D Printer Series
• Application: Prototyping

Precautions

• To Clean Printed Part: For best results clean with Phrozen Wash: Resin Cleaner. Do not immerse printed part into alcohol over 30 sec.
• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year

Print Profiles