LAUDA Puridest PD 12 R
Water still 220 V; 3/PE; 50/60 Hz

Features:
Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting
The distillate storage tank accepts twice the hourly capacity of the still
Distillate withdrawal through drain cock with continuous and touch position.
Condenser (cooling coil) inside the storage tank, easily exchangeable.
Solenoid valve to control the water supply
Economical energy consumption by distillation of the heated cooling water.
Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.
Evaporator easily accessible for cleaning purposes.
CO2 degassing through outlet in the condenser.
Electronic contamination monitoring of the still with distillation stop and visual cleaning instruction
Automatic refill of the storage tank after distillate removal, controlled by electronic level detection
Thermostatic low water cut-off
Heating element, evaporator, storage tank and condenser made of stainless steel.
Housing made of galvanised sheet steel, powder coated
Double-walled housing

Technical Features:
Conductivity stage 1 /25 °C: 2.3 µS/cm
Production output: 12 L/h
Tank volume: 24 L
Heater power max.: 9 kW
Power consumption max.: 9 kW
Cooling water flow rate: 3.3 L/min
Pressure difference cooling water min.: 3 bar
Maximal pressure cooling water: 7 bar
Water cooling inlet for hose: 1/2 ''
Water cooling drain for hose: 3/4 ''
Overall dimensions (WxDxH): 780 x 410 x 670 mm
Weight: 41 kg
Ambient temperature range: 10 ... 40 °C
Power supply: 220 V; 3/PE; 50/60 Hz
Power plug: Power cord without plug (HAR)